Find out which our products can fit your company's demand:
- Single Spring Mechanical Seal
- Multiple Spring Mechanical Seal
- Wave Spring Mechanical Seal
- Metal Bellow Mechanical Seal
- Cartridge Mechanical Seal
- Stationary Seat
- Sealing Material
- Alfa Laval Pump Mechanical Seal
- APV Pump Mechanical Seal
- Grundfos Pump Mechanical Seal
- Flygt Pump Mechanical Seal
- Other Pump Mechanical Seal
Tel:+0086-577-80126008
Fax:+0086-577-86600862
You are here : (A) Rubber asbestos packing XS250 (extreme temperature 250 ¡æ), Rubber asbestos packing XS350 (extreme temperature 350 ¡æ):
Medium: steam, water, alkaline solution. Main production units: Shanghai asbestos factory, Beijing asbestos factory, Qingdao asbestos factory, Kaifeng asbestos plant, asbestos factory in Xi'an, Chongqing asbestos plant, asbestos plant in Anshan, Shenyang sealing compound pilot plant.
(B) Oil asbestos packing YS250 (extreme temperature ¡Ü 250 ¡æ), YS350 (extreme temperature ¡Ü 350 ¡æ): The product is characterized by the packing contains oil, the friction coefficient is small, the compression volume.
Medium: steam, air, industrial water and heavy oil products.
Main production units: Shanghai asbestos factory, Beijing asbestos factory, Qingdao asbestos factory, Kaifeng asbestos plant, asbestos factory in Xi'an, Chongqing asbestos plant, asbestos plant in Anshan, Shenyang asbestos plant.
(C) PTFE Asbestos packing SMF: Operating temperature: -100 ~ +250 ¡æ, for the media: weak acid, alkali and other corrosive media.
Main production units: Shanghai asbestos factory, Qingdao asbestos factory sealed packing pilot plant in Shenyang.
(d) of oil, cotton, hemp packing YMM: Limit temperature: ¡Ü 120 ¡æ, Medium: water, water, groundwater, seawater.
Main production units: Shanghai asbestos factory, Beijing asbestos factory, Qingdao asbestos factory, Kaifeng asbestos plant, asbestos factory in Xi'an, Chongqing asbestos plant, asbestos plant in Anshan, Shenyang sealing compound pilot plant.
(E) PTFE fiber braided packing, the products divided into six grades.
Main production units: Hefei General Machinery Research Institute, Shandong Zaozhuang fluorine plastics factory, Shanghai Plastics Research Institute, Shenyang sealing compound pilot plant.
In use, began to allow a small amount of leakage of filling, to be used for a period of time, fill in a relatively stable state, then adjust the packing gland. Must not be the beginning of the weight of too tight to prevent burn filler.
(F) carbon fiber braided packing seals: is a high strength, high modulus of new material, it has high strength, elastic modulus, high temperature resistance, chemical corrosion, good thermal conductivity, low coefficient of thermal expansion advantages, and has Self-lubricating.
