Number of sensors used in vehicles, more and more to ensure their vehicle safety, comfort and played a key role in reducing fuel consumption.

 Sensor is usually installed in the tested numerical control Department. Since launching the signal out through the electrodes, the sensor must be sealed in the electrode exports, measured against their respective regions, such as temperature, pressure or aggressive media. Separate molding process by connecting the electrode and monitoring sensors have been unable to meet the needs of today's automotive industry. Road industrial adhesive bonds link the adhesive material used to make up for this shortfall.

 The correct choice of adhesive on the reliability of the sensor of decisive significance. This use of the sensors under adverse conditions is more important, for example, sensors or pressure sensors to monitor fuel. For such applications, German Road Industrial adhesive material specially developed project anhydride cured epoxy based potting resin. Such adhesives for high temperature and aggressive media has excellent resistance, and can provide specific mechanical properties